Fuse Sift buy in the Artsupport Shop supplier for goldsmithing and watchmaking equipment  3D rapid prototyping printer SLS































  



























    



	
You have no items in your Order Basket
Order Basket
0
 

Quality - Tradition - Innovation Everything for Jewellers & Watchmakers

 
 
 
top

3D Printers 

Fuse Sift

Currently out of stock, available again shortly


 
 
Variety
Description
Accessories
Media
 

All-In-One Powder Recovery for the Fuse SLS 3D printer

The Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 generation printers. This easy-to-use, all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device, for the most functionality in a single device available on the SLS market.

  • Compact, enclosed system: A negative air pressure system keeps powder inside while enabling open access and easy cleanup.
  • Low waste: A 30% material refresh rate means you can print with up to 70% recycled powder, indefinitely. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints.
  • Automatic powder mixing: Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.
  • Nonstop printing: Reduce downtime by transferring modular build chambers and powder cartridges between the Formlabs SLS 3D printer and Fuse Sift for a nonstop, cyclical workflow.
  • A complete toolkit: The Fuse Sift includes a set of finishing tools to help you clean excess powder from parts with ease.

Included Accessories:

  • Large Brush
  • Small Brush x 2
  • Pipe Cleaners
  • Dental Picks
  • Gloves
  • Dust Mask
  • Safety Glasses
  • Vacuum Brush Tool
  • Vacuum Crevice Tool
  • Lifting Straps


 

Tech Specs

 

Printer Compatibility: Fuse Series SLS 3D printers

Dimensions: 101.5 × 61.0 × 154.5 cm

Height when open: 190 cm

Fuse Sift Dimensions (W × D × H): 99.1 × 61.0 × 188.8 cm

Build Chamber Dimensions (W × D × H): 27.9 × 34.2 × 48.9 cm

Minimum Access Dimensions (W × D × H): 221.1 × 122.0 × 218.0 cm

Fuse Sift Weight: 93 kg (without build chamber or powder)

Build Chamber Weight: 11 kg (17.6 kg, full with 20% packed powder)

Air Filtration Technology: Replaceable HEPA filter

Build Volume (W × D × H): 16.5 x 16.5 x 30.0 cm (with radiused corners)

Fresh Powder Hopper Capacity: 17 liters

Used Powder Hopper Capacity: 18 liters

Operating Environment: 18 – 26 ºC; ≤ 50% ambient humidity

Air Handling: Negatively pressurized hood with replaceable HEPA filter; Independent venting system

Air Filtration: Replaceable HEPA medium

Power Requirements:

  • With a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC): 230 VAC, 7.5 A (dedicated circuit)
  • With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC): 230 VAC, 10 A (dedicated circuit)

Vacuum Requirements: Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g., a NFPA 652 compliant vacuum)

Connectivity: Wi-Fi (2.4 GHz); Ethernet (1000 Mbit); USB 2.0

Ethernet Connectivity: RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port; Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T.

Wi-Fi Connectivity: Protocol: IEEE 802.11 b/g/n; Frequency: 2.4 GHz; Supported security: WPA/WPA2

USB Connectivity: USB (rev 2.0) B port with a USB A-B cable

Sound Emission: Does not exceed 76.5 dB(A)

Fuse Sift Control: Interactive touchscreen, physical buttons



 

The following accessories are available:

385305 Nylon 12 Powder, 6 kg
385306 Nylon 12 GF Powder, 6 kg
385307 Nylon 11 Powder, 6 kg
385308 Nylon 11 CF Powder, 6 kg
385315 TPU 90A Powder, 6 kg
 
 

 
 
 
 

Artsupport verwendet Cookies, um Ihnen den bestmöglichen Service zu gewährleisten. Wenn Sie auf der Seite weitersurfen stimmen Sie der Cookie-Nutzung zu.